The Edward River LiDAR survey provides elevation and photographic data over a 1200 km² along the Edward River, north of Swan Hill. The LiDAR was captured in November and December 2013, at a nominal density of two outgoing laser pulses per square metre. Photography was captured simultaneously and provided as an ortho-rectified mosaic with a resolution of 20cm. The LiDAR was delivered in a full waveform format that retains a higher level of precision and significantly more above ground information than traditional LiDAR. A set of seamless products, including hydro-flattened bare earth terrain surfaces (DEMs), were produced to the ICSM specification. Other derived surfaces include a Digital Surface Model (DSM), Canopy Height Model (CHM) and Foliage Canopy Model (FCM). The outputs of the project are compliant with National ICSM LiDAR Product Specifications and the NEDF.

The Edward River LiDAR survey provides elevation and photographic data over a 1200 km² along the Edward River, north of Swan Hill. The LiDAR was captured in November and December 2013, at a nominal density of two outgoing laser pulses per square metre. Photography was captured simultaneously and provided as an ortho-rectified mosaic with a resolution of 20cm. The LiDAR was delivered in a full waveform format that retains a higher level of precision and significantly more above ground information than traditional LiDAR. A set of seamless products, including hydro-flattened bare earth terrain surfaces (DEMs), were produced to the ICSM specification. Other derived surfaces include a Digital Surface Model (DSM), Canopy Height Model (CHM) and Foliage Canopy Model (FCM). The outputs of the project are compliant with National ICSM LiDAR Product Specifications and the NEDF.